PER AVERE MAGGIORI INFORMAZIONI CONTATTACI

ADDERLink INFINITY 4000

The ADDERLink™ INFINITY 4000 Series (ALIF4000) is the world’s first dual-head, high performance 4K IP KVM extender over a single fiber.
The ALIF4000 delivers pixel-perfect, color accurate picture quality at 4K60 with USB2.0 with fast switching. Fully compatible with the existing INFINITY range, and supported by the trusted ADDERLink INFINITY Manager (AIM), the ALIF4000 can be used as a point-to-point extender or easily integrated into a wider matrix system; enabling KVM users to migrate to 4K without the need to rip and replace.

  • Dual-head 4K, video, audio and USB over a single fiber connection
  • Pixel-perfect, color accuracy at 4K60
  • Bi-directional analog audio
  • Adder’s USB True Emulation for fast switching
  • Backwards compatible with existing ADDERLink INFINITY infrastructure
  • Plug and play

Dual-head 4K screens over a single link
The ALIF4000 can deliver two 4K60 screens over a single link.

IP-based
Use your existing standard 10GbE networking infrastructure to extend or matrix your computing resources to your users. Supports teaming for network resilience and redundancy.

Perfect digital video
Using the same encoding system as the other products in the ADDERLink INFINITY range, the digital video is spatially lossless, with 1:1 pixel mapping, ensuring that the digital video you receive is the same as the one leaving your remote computer.

Backwards compatibility
The ALIF4000 can integrate seamlessly into your existing ADDERLink INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints.

Digital KVM matrix
By the addition of ADDERLink INFINITY Management system (A.I.M.) you can turn multiple point to point extenders into a matrix system that allows any workstation to connect to any computer connected to the network. See the A.I.M. datasheet for details.

Audio capability
Analog audio (Line In, Line Out) to support headsets and microphones.

EDID management
The system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed.

Plug and Play
The ADDERLink INFINITY range is delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software.

USB True Emulation
USB2.0 enables connection to any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers.

Approvals / Compliance

  • CE
  • FCC

Standards
USB: 4 ports of USB2.0 of USB True Emulation to support keyboard, mouse and touch
USB device seen as: 7 or 13 port hub
Ethernet: 10GbE (No 10 / 100 / 1000 support)

Operating/storage conditions
Operating temperature: 0 to 40ºC  / 0 to 104ºF
Storage temperature: -10 to 60ºC / 10 to 140ºF
Storage and operating relative humidity: 10-90% non-condensing
Altitude: < 3000m

Power
External power: 12VDC, 5A
Typical power consumption: 20W
BTU: 68.24BTU/hr

Physical
Dimensions: (L) 210mm /8.3” x (W) 215mm/8.5” x (D) 40mm/1.6”
Weight: 1.8kg /4 lb

Materials
Aluminium and steel construction

Connectors – Local Unit (TX)
Computer: 2 x display port, 2 x USB type B 2 x 3.5mm audio jack sockets, 1 x DB9 socket
Ethernet: 2 x 8p8c (RJ45), 2 x SFP+ cages
Power: 3 pin Kycon socket

Connectors – Remote Unit (RX)
Desk: 2 x display port, 5 x USB type A, 2 x 3.5mm audio jack sockets, 1 x 3.5mm SPDIF socket
Ethernet: 1 x 8p8c (RJ45), 2 x SFP+ cages
Power: 3 pin Kycon socket

Video Resolutions
Supports up to 4K UHD or DCI and refresh rates to 60Hz

Audio
Analog Line in/out 2 channel 16bit 48KHz 1V RMS in / 1V RMS out

Packing Box
Dimensions: (L) 285mm / 11.2-inch (W) 245mm / 9.6inch (D) 145mm/5.7inch Weight: 2.5kg / 5.5lb

Hai bisogno di maggiori informazioni?

Modello

ModelloArticoloDescrizione
ALIF4021TINFINITY 4000INFINITY Transmitter Only
ALIF4021RINFINITY 4000INFINITY Receiver Only