ADDERLink INFINITY 100T (ALIF100T) is a Zero U, IP-based high performance KVM (Keyboard, Video, Mouse) extender and/or matrix that enables the use of standard IT infrastructure to extend computers away from the user environment.
- Zero U form
- IP-based: use your existing network
- USB powered
- Low power consumption
- Supports multiple video resolutions
- Easy retrofit into existing infrastructure
- Plug and play
Zero U size
The ALIF100T takes Zero U of rack space in the server room allowing for ultimate flexibility and ease of installation.
Use your existing networking infrastructure to extend or matrix your computing resources to your users.
The device can be powered from USB. This means there is no need to provision for an external PSU. Options for powering from an external PSU or redundant PSU are also available.
Low power consumption
Requiring less than 3 Watts, the unit can be powered from USB. This means it could use less than a quarter of the energy when compared to other solutions.
Multiple video options
The system supports resolutions to a maximum of 1920×1200@60Hz through either DVI, display port and VGA interfaces.
Enables you to connect any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers.
Seamless integration with the ADDERLink INFINITY range
The ALIF100T can integrate seamlessly into your existing ADDERLink INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints.
Perfect digital video
The ALIF100T uses an encoding system that is spatially-lossless, with 1:1 pixel mapping, so the digital video you receive is the same as the digital video leaving the remote computer ensuring the very best picture available and colour accuracy.
The system delivers USB stereo audio (Line In, Line Out) digitally across the network.
The system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed.
Digital KVM matrix
By the addition of ADDERLink INFINITY Management system (A.I.M.) you can turn multiple point to point extenders into a matrix system that allows any workstation to connect to any computer connected to the network. See the A.I.M. data sheet for details.
Operating temperature: 0 to 50°C
Storage temperature: -10 to 60°C
Storage and operating relative humidity: 10-90% non-condensing
Altitude: < 3000m
MTBF: >500,000 hours
USB power: 2 x USB2.0 (2x 500mA @5V) 5W
External power: 5VDC, 1A, (LPS)
Typical power consumption: 3W BTU: 10.2BTU/hr
Dimensions: (L)110mm /4.3” x (W)55mm/2.17” x (D)25mm/1” with 30cm cable length
Weight: 0.2kg /0.4 lb
Materials: ABS and aluminium construction
Computer: DVI-D, display port, or VGA, USB type A x 2
Ethernet: 1 x 8p8c (RJ45)
Power: 2.5mm socket
USB: USB2.0 full and low speed (No HS support)
USB features: Keyboard, mouse and touch USB device seen as: 7 or 13 port hub
Max video resolution: Up to 1920×1200@60Hz
Audio: Line in/out USB audio 2 channel 16bit 48KHz
Display port Audio: None
Ethernet: 1GbE (No 10/100 support)
Display port version requires source to be DisplayPort Dual-Mode (DP++) compliant.
Dimensions: (L) 292mm /11.5 inch (W) 245mm/9.6inch (D) 55mm/2.1inch
Weight: 0.5kg / 1.1lb
Approvals / Compliance
CE and FCC: See the compliance web page for the full list Cable types recommendations Cat5e and above
Cable length rules
Ethernet specifications rules apply 100 meters maximum run